Dantona LCPLC-700 PLC Battery for Allen Bradley & GE Fanuc – 6V Lithium

When a PLC or CNC control throws a low-battery alarm, the clock is running on the memory that keeps your program and parameters alive. The Dantona LCPLC-700 is the replacement PLC battery for that job — a 6V lithium pack that backs up the RAM in Allen Bradley, GE Fanuc, and Panasonic controls so the machine holds its settings through a power-down.

This is a memory-backup battery, not a power source. It sits in the controller and keeps the volatile memory alive while the machine is off or during a power cycle. Swap it before the old one is fully dead and the program stays intact; let it die first and you can be looking at a reload from backup, or a call to the OEM. Lithium is the chemistry these controls are specced around because it holds voltage steady for years on the shelf and in service, so the factory battery is lithium and the replacement should be too. We keep these on the shelf for the production and machine shops around Lake County and Cleveland's east side, where a controller losing its program mid-run turns into an expensive afternoon.

Replaces A98L-0031-0025, BR2/3AGCT4A, and These Part Numbers

Cross-references to the common Allen Bradley, GE Fanuc, and Panasonic memory-backup packs, including:

• Allen Bradley BA 1764-LxP
• Allen Bradley A98L-0031-0025
• GE Fanuc A06B-6114-K504
• Panasonic A98L-0031-0025 (also written A98L00310025)
• Panasonic BR2/3AGCT4A, BR-2/3AGCT4A-HD, and BR 2/3AGCT4A
• Panasonic BR2/3A4F
• Battery Guy 18628 and BR2/3A4F
• Dantona MATT PACK and SHS749

Check the number printed on your old pack and the connector against these. If you're not sure it's your battery, call us with the controller model — we'd rather check twice than send you back with the wrong one.

Key Features

• 6V lithium memory-backup pack: four cells wired to hold controller RAM through power loss
• Direct fit for Allen Bradley, GE Fanuc, and Panasonic PLC and CNC controls
• Connector termination for a plug-in swap, no soldering at the machine
• 2900mAh capacity for long backup life between changes
• Lithium chemistry: stable voltage and a long shelf life, matched to what these controls expect

Specifications

Local Pickup in Northeast Ohio

This PLC battery is on the shelf for local pickup at our Willoughby shop, and we supply plants and machine shops across Lake County and Cleveland's east side. Bring in the old pack or your controller model and we'll confirm the fit before you head back to the floor.